ETI 2012 Public Workshops
ASME Y14.5 1994 - 2009 1-Day GD&T Update
Workshop flyer PDF
This drawing shows a small percentage of the changes in the ASME Y14.5 Standard.
Click here to print the entire drawing.
|
Understand the fundamental differences between ASME Y14.5M-1994 and ASME Y14.5-2009
The one-day ASME Y14.5-2009 Update Workshop will teach you about the pertinent changes made to the Y14.5 standard. You'll learn how the subject matter has been reorganized, and about new sections that have been created for profile, orientation, and form. |
Westland, MI
May 17
|
The workshop covers these major changes to the standard:
- Over thirty new or revised terms
- Sixteen new or revised symbols
- Revisions and additions to the fundamental rules
- Revisions and additions to the concept of feature of size
- Revisions and new symbols for datum specifications
- Revisions to composite position tolerances
- Surface boundaries and axis methods of interpretation
- Revisions and new additions to profile tolerances
Course
Developer: GD&T expert Alex Krulikowski
 Our
ASME Y14.5 1994-2009 update course was developed by an expert
on the subject: ETI president, Alex Krulikowski was involved in creating this new version of ASME Y14.5.
Professionals
across the globe turn to Alex Krulikowski and ETI for training
in geometric dimensioning and tolerancing. As
president of ETI, Alex has helped more
than 60,000 students learn GD&T through his textbooks,
self-study courses, computer-based training, and online
learning center. Now you have the opportunity to learn GD&T
from Alex or one of his personally trained instructors at
an ETI public workshop.
|
About
the Course
The new ASME standard contains numerous changes that affect the specification and interpretation of tolerancing. This workshop covers over sixty significant revisions, additions, and deletions to the new standard. New features are explained and compared to the 1994 Standard, and a set of comprehensive comparison charts that highlight itemized changes in the standard are included in the workshop price.
Who
Should Attend
This course intended for any person involved in the creation or interpretation of new drawings.
Workshop
Highlights
The ASME Y14.5 1994-2009 Update Course will help you to:
- Understand
changes in the standard
- Learn about new symbols and how to apply them to drawings
- Determine the impact of the new standard
Skill
Level Needed
Attendees must have a basic understanding of Y14.5-1994 Dimensioning
and Tolerancing practices.
Students
who attend our workshops walk away with more than knowledge.
They gain on-the-job skills because our materials are performance-based,
and each workshop approaches the subject from a design perspective.
ASME Y14.5 1994 - 2009 One-Day GD&T Update - $375
Live web workshop - $325
Each
workshop participant receives:
PLUS
A 30-day pass to ETI's Engineering Drawing Requirements web-based course ($49 value)
|
Purchase the ASME Y14.5-2009 Standard
Publisher:
American Society of Mechanical Engineers
This is the official ASME Y14.5-2009 Standard for Dimensioning
and Tolerancing. Revised and updated from the ASME Y14.5M-1994
Standard, this book covers all the rules and principle concepts
of GD&T. A copy of this standard belongs in every engineering
and inspection department. Published by American Society of
Mechanical Engineers. |
 Quantity discounts available.
ETI offers a 10% discount on three or more registrations. Call 800-886-0909 for more information. |
Don't wait until it's too late — only 15 seats available per class.
Register for your course, today.
Call 1-800-886-0909 to register or use our online registration form to enroll today. To fax or mail your registration, use our registration form pdf.
|
